Metal Roofing

Standing Seem and Corrugated Metal Roofing

M&J Roofing in South New Jersey offers custom Standing Seem and Corrugated Metal Roofing across Atlantic County, Camden County, Gloucester County and Monmouth County in New Jersey.

For more information regarding our Metal Roofing Products and Service offerings, call 856.431.5488 today.

By Mike, Owner — M&J Roofing Serving South Jersey since 2007 NJ HIC #13VH12363400 GAF Master Elite Certified Last updated:

M&J Roofing has installed standing seam and corrugated metal roofs across Camden, Gloucester, and Atlantic counties since 2007. From our Blackwood headquarters in Gloucester Township, our GAF Master Elite certified crews handle metal roof installation and replacement in Cherry Hill, Haddonfield, Glassboro, Washington Township, and down the shore to Brigantine and Atlantic City. Call 856.725.5759 for a free on-site estimate, usually scheduled within the week.

Standing Seam vs. Corrugated Metal Roofing: Which Is Right for Your South Jersey Home?

Standing seam is the better fit for most South Jersey homes; corrugated is the budget option for barns, workshops, and porch roofs. Standing seam panels lock together with hidden fasteners, so there are no exposed screws to back out and leak after a decade of freeze-thaw cycles — a real issue in Camden County winters. Corrugated panels cost roughly half as much but use exposed fasteners that need re-tightening over time. On historic homes in Haddonfield and Pitman, standing seam also matches the original metal accent roofs many of those Victorians were built with. According to the Metal Roofing Alliance, quality metal systems carry wind ratings up to 140 mph — well above what nor'easters bring through South Jersey. If you're weighing metal against a standard asphalt roof, the comparison below shows the trade-offs.

Standing SeamCorrugated MetalAsphalt Shingle
Installed cost (per sq ft)$10–$16$6–$9$4.50–$7
Expected lifespan40–70 years25–40 years15–20 years
FastenersHiddenExposedn/a
Wind ratingUp to 140 mphUp to 120 mph60–130 mph
Best useHomes, visible roofsOutbuildings, budget jobsStandard reroofs

How Long Does a Metal Roof Last in New Jersey?

A properly installed metal roof lasts 40 to 70 years in New Jersey — two to three times longer than asphalt shingles, which average 15 to 20 years in our climate. South Jersey's mix of humid summers, nor'easters, and coastal wind is exactly the environment metal handles best: panels shed snow and rain instead of absorbing moisture the way aging shingles do. Research from Oak Ridge National Laboratory shows reflective metal roofing can also cut summer cooling costs by up to 25%. One caveat that matters here specifically: standard Galvalume-coated steel panel warranties are typically voided within about 1,500 feet of breaking surf, which is why we spec aluminum panels for shore properties in Brigantine, Atlantic City, and the back bays. Inland in Cherry Hill, Glassboro, or Blackwood, coated steel performs for decades without that concern.

What Does Metal Roof Installation Cost in South Jersey?

Most South Jersey homeowners pay $18,000 to $35,000 for a full standing seam metal roof in 2026, depending on roof size, pitch, and tear-off. Corrugated systems on the same home typically run $10,000 to $18,000. Three factors move the number most:

  • Roof complexity — dormers, valleys, and steep pitches common in Haddonfield's older housing stock add labor
  • Material choice — aluminum (required near salt water) costs more than coated steel
  • Tear-off vs. overlay — metal can often be installed over a single layer of existing asphalt shingles, saving disposal costs

One thing most contractors won't tell you: since New Jersey reclassified residential roof replacement as ordinary maintenance in 2018, most reroofs on 1- and 2-family homes in South Jersey no longer require a construction permit — removing permit fees and waiting time from the project. If your existing roof is past repair, see our roof replacement in South Jersey service, and our financing options can spread the investment into monthly payments.

Our Metal Roof Installation Process from Blackwood, NJ

Every M&J metal roofing job starts with a free on-site measurement from our Blackwood headquarters at 26 Evergreen Ave — about 20 minutes from Cherry Hill or Glassboro and 45 minutes from Atlantic City. As a registered NJ home improvement contractor (HIC #13VH12363400) and GAF Master Elite certified installer — a designation GAF awards to roughly the top 2% of roofing contractors in North America — our work has qualified for manufacturer-backed material warranties since 2007. The process runs in four steps:

  1. On-site inspection and free written estimate
  2. Panel and color selection — standing seam or corrugated, steel or aluminum
  3. Installation — most residential metal roofs are completed in 2–4 days
  4. Final walkthrough with manufacturer warranty registration

We install metal roofing on homes and businesses across all of Camden and Gloucester counties plus Hammonton, Brigantine, and Atlantic City in Atlantic County — see our commercial metal roofing services or browse recent projects in our gallery.

Metal Roofing FAQs for South Jersey Homeowners

How much would a metal roof cost for a 1,500 sq ft house in South Jersey?

Expect $16,000–$30,000 for standing seam on a typical 1,500 sq ft South Jersey home, since the actual roof surface runs 1,700–2,100 sq ft once pitch is included. Corrugated metal on the same home runs roughly $9,000–$16,000. Pitch, tear-off, and material choice drive the final number.

What are the drawbacks of metal roofs?

Higher upfront cost than asphalt and more rain noise if installed without solid sheathing are the two real drawbacks. Both are manageable: metal's 40–70 year lifespan usually beats asphalt on total cost of ownership, and installation over solid decking with underlayment keeps noise comparable to shingles.

Can a metal roof be installed over asphalt shingles?

Yes — metal panels can typically be installed over one existing layer of asphalt shingles, which eliminates tear-off and disposal costs. Metal weighs 100–150 lbs per square versus 275–325 lbs for asphalt, so the added load is minimal. We confirm decking condition during the free inspection first.

Is a metal roof worth it near the Jersey Shore?

Yes, if the right metal is used. For homes in Brigantine, Atlantic City, and other shore towns, we install aluminum panels because standard steel panel warranties are voided near salt water. Aluminum doesn't rust and handles coastal wind better than aging shingles.

Does M&J Roofing offer free metal roofing estimates in South Jersey?

Yes — free written on-site estimates across Camden, Gloucester, and Atlantic counties, usually scheduled within a week from our Blackwood office. Call 856.725.5759 or use the form on this page.

Get a free metal roofing estimate — or visit our showcase building in Blackwood to see standing seam and corrugated panels in person before you decide.

Call 856.725.5759 Today
M&J Roofing — NJ HIC #13VH12363400
Phone: 856.725.5759
26 Evergreen Ave, Blackwood, NJ 08012
Second location: 4171 Route 42, Building A, 2nd Floor, Turnersville, NJ 08012
Hours: Mon–Fri, 8am–4:30pm
Metal Roofing in New Jersey